WT522 INSTRUCTION MANUAL
Note:
After 20 seconds without pressing any button the clock switches automatically from setting mode to
Normal clock mode.
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the
alarm will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm
signal is heard.
°C/°F temperature display:
The temperature is displayed either in °C or °F. Pressing the “
” button allows you to switch
between the individual models.
Automatic Snooze function:
Proceed as follows to activate the automatic Snooze function: While the alarm is sounding, press the
“
SNOOZE/LIGHT
” button to activate snooze function. Then Snooze function is active.
or
icon twinkle on the display.
This operation moves the alarm back by 5 minutes and the alarm will restart at this time.
The Snooze function can be interrupted by pressing any button
except “
SNOOZE/LIGHT
” button.
Note:
If a snooze alarm in the process, another alarm, automatically stop the first alarm snooze function.
Backlight
At any time, press the “
SNOOZE/LIGHT
” button will light the backlight for 8 seconds.
In the case of using the 5V power adapter, the product's backlight will have 4 brightness mode, light -
medium - low - out, each press the “
SNOOZE/LIGHT
” button one time to switch one mode.
Projection function
When using the 5V power adapter, you can select the projection lamp to stay lit or not lit by the
Projection ON/OFF
switch on the back of the product.
The projection lamp on the right side of the product can project the current time of the clock on the wall
or roof in order to watch the time at night, if the projection direction is not correct, press the “
”
button to switch the display direction.
Reception of the Radio signal:
The clock automatically starts the
DCF
signal search when the batteries are changed. The radio mast
symbol starts to flash.
At 1:00am the Radio Controlled clock automatically carries out a synchronization procedure with the
DCF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful
(The radio mast symbol disappears from the display), the system will automatically attempt another
synchronization at the next full hour. This procedure is repeated automatically up to 5 times.
To start manual
DCF
signal reception, press and hold the “WAVE “button. If no signal is received within
seven minutes, then the
DCF
signal search stops (the radio mast symbol disappears).
