Settings Menu
1. Hold the MODE/MIN button to enter settings menu.
2. Press the SNOOZE button to confirm adjustments and move to next
item.
3. Press the AL/HOUR or MODE/MIN button to adjust values.
Note:
• When setting time (hours and minutes flash together):
o Use the AL/HOUR button to set the hour.
o Use the MODE/MIN button to set the minutes.
• When setting the calendar (month and date flash together):
o Use the AL/HOUR button to set the month.
o Use the MODE/MIN button to set the date.
Settings menu order:
1. Time Zone
2. Hour & Minutes (together)
3. Year
4. Month/Date (together)
5. 12/24 Hour Format
6. Fahrenheit/Celsius
7. Daylight Saving Time ON/OFF
Press the SNOOZE button to exit, or wait 30 seconds without pressing
buttons to return to the normal time display.
Backlight
• The backlight will come on for 8 seconds whenever a button is
pressed. The backlight will not stay on constantly.
This clock has time zones
from GMT 0 to +/-12h
North American time zones:
-4 h - Atlantic
-5 h - Eastern (default)
-6 h - Central
-7 h - Mountain
-8 h - Pacific
-9 h – Alaska
-10 h - Hawaiian
• WWVB Icon will flash when searching.
• The WWVB icon will remain on constantly when the time signal
has been received during the past 24 hours
• For information about WWVB visit:
http://bit.ly/AtomicTime
ATOMIC SIGNAL SEARCH:
The clock will search for 1 hour between midnight and 6am until the WWVB
time signal is received. After reception, the clock will only search for the
atomic signal after midnight.
Atomic Time
Page | 3
www.lacrossetechnology.com/support
WT-5220U-ITv2
