La Crosse Technology, Ltd
Page 2
TIME IS INCORRECT
This clock has manual set time.
Gently spin the time set wheel on the back of the clock to set the time.
MANUALLY SET TIME
Gently spin the time set wheel on the back of the clock to set the time.
HOW LONG WILL THE BATTERY LAST?
A good AA Alkaline battery will last over 12 months.
HANDS SPIN NON-STOP
This is indicative of a low or overpowered battery (number 1 warranty issue).
Replace battery and perform restart procedure.
HANDS JUMPS OR JERKS AROUND THE DIAL
This is indicative of a low or overpowered battery (number 1 warranty issue).
Replace battery and perform the
restart procedure
.
Hands stuck at certain time
HANDS ARE LOOSE.
If under warranty, the clock must be sent in for repair or the movement needs to be
replaced.
POSITION THE CLOCK
This La Crosse Technology
®
atomic clock is designed for indoor or outdoor use.
INDOOR:
Select a location to place the radio-controlled clock where it will be at least
six feet away from a TV, computer, air conditioner or other household electrical
appliances.
OUTDOOR:
Select a location
sheltered
from direct sunlight and rain, preferably under
a roof or porch area.
This clock is designed for indoor and outdoor use: but only in a dry environment and in a
temperature range between -10°F and 131°F.
Note:
The clock is NOT waterproof. If left in the elements water may enter the clock and
damage it.
HOW DO I ADJUST THE TEMPERATURE OR HUMIDITY?
Use a flat tipped screwdriver to gently turn the temperature or humidity sensor screw at
the back of the clock to the desired setting.
