63
Note:
The unit will still try to receive the signal at each full hour despite it being manually set.
When it does receive the signal, it will change the manually set time into the received time.
During reception attempts the DCF tower icon will flash. If reception has been unsuccessful,
then the DCF tower icon will not appear but reception will still be attempted the following
hour.
CALENDAR SETTING
The date default of the Weather Clock is 1. 1. of the year
2011
after initial set-up. Once the
radio-controlled time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually. To do this:
1.
Using the CH/ + key, set the year required. The range runs from
2011 to 2029
(default
is
2011
)
.
2.
Press the SET key to enter the month setting mode.
Year
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
