Page | 12
Outdoor Sensor Signal Strength
•
Press the
TX-RCC SEARCH(RECHERCHE TX/RCC)
button
to search for the sensor.
•
The strength signal icon will animate until the sensor signal is received or for 3
minutes if no signal available.
View and Reset High/Low Values
The station automatically resets the
HIGH/LOW
values daily at midnight (00:00)
.
•
Press the
HIGH/LOW(REGLAGES/
+
/
-
+
/
-
+
/
-
+
/
-
)
button
to view maximum values.
•
In HIGH mode, hold
HIGH/LOW(REGLAGES/
)
maximum values.
•
Press the
HIGH/LOW(REGLAGES/
)
button to view minimum values.
•
In HIGH/LOW mode, hold
five seconds to manually
reset minimum values.
button for five seconds to
manually reset
91
Bring the sensor in the house five feet from the weather station.
flashes during signal search.
the
HIGH/LOW
(REGLAGES/
)
button
•
Hold the
TX/RCC SEARCH (RECHERCHE TX/RCC)
button for two seconds,
to start or stop a manual
time signal search. The
Time Signal Icon
Note:
When searching for the time signal, the backlight and rim light will
turn off for a short period
.
DCF Time Signal Search
Restart:
When the outdoor readings show dashes:
•
•
Remove batteries from the sensor, as well as, the batteries and AC adapter
from the weather station.
•
Press any button 20 times.
•
After 15 minutes insert batteries into the sensor, as well as batteries and AC
adapter into the weather station.
•
Wait 15 minutes to establish a strong connection. Place sensor outside in
shaded location.
Outdoor Sensor Positioning
Time signal Icon
Sensor Strength Icon
•
Mount the outdoor sensor on a north-facing wall or in any well shaded
area. Under an eave or deck rail is preferred
.
•
The maximum wireless transmission range to the weather station is over
•
Be su
meters (300 feet) in open air ,not including walls or floors
re the outdoor sensor is mounted vertically.
HIGH/LOW(REGLAGES/
+
/
-
) Button
TX/RCC SEARCH
ALARME 1
ALARME 2
RECHERCHE
TX/RCC
INTENSITE DU CERCLE
FORT/FAIBLE/OFF
ALARME 1
ALARME 2
RECHERCHE
TX/RCC
INTENSITE DU CERCLE
FORT/FAIBLE/OFF
