2
Use the DOWN ARROW button to decrease a value.
SET ALARM TIME
From normal time and temperature display mode, press and release the
TIME ALARM button once to show alarm time. Hold the TIME ALARM
button for three seconds to enter alarm set mode.
z
HOUR: The
Hour
will flash. Use the ARROW buttons to set the hour,
and press TIME ALARM button to confirm and switch to minutes.
z
MINUTES: The
Minutes
will flash. Use the ARROW buttons to set the
minutes, and press TIME ALARM button to confirm.
z
Press the SETTINGS button to return to normal mode
Note:
When no buttons are pressed for ten seconds, the forecast station
will save the last change and default back to normal mode.
ACTIVATE/DEACTIVATE TIME ALARM
z
In normal mode, press and release the TIME ALARM button once to
show alarm time.
z
Press and release the TIME ALARM button repeatedly to turn
ON/OFF alarm. The alarm icon appears when alarm is activated.
Note
: The alarm will ring for 2 minutes then turn off if no buttons are
pressed.
SNOOZE ALARM
When the alarm sounds, press the HI/LOW/OFF
button to snooze the
alarm for 10 minutes. The snooze option can be repeated three times.
The alarm icon will flash while the snooze feature is
active.
Note
: while the alarm sounds press any button
except
the TIME ALARM button to turn the alarm off.
BACKLIGHT
Operating on A/C adapter,
the backlight is on continuously when
operating the forecast station with the 5-volt A/C adapter.
Note:
When the adapter is NOT in use, the Hi/Low/Off light feature is
not available.
•
HIGH:
The backlight is defaulted to HI at setup when the Adapter is in
use.
•
LOW:
Press and release the HI/LOW/OFF button to dim the backlight.
•
OFF:
Press and release the HI/LOW/OFF button again to turn the
backlight off. Press and release the HI/LOW/OFF button again to return
to full strength.
Note:
When the backlight is off, press any button to activate the
backlight for 10 seconds.
Operating on battery power only
,
press and release the any button
and the backlight will show for 10 seconds.
TEMPERATURE TREND ICONS
The indoor and outdoor temperature trend indicators will update every
30 minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rising more than 2°F /1°C in the past three
hours
Temperature has
not changed
more than 2°F/1°C
in the past three hours.
Temperature falling more than 2°F /1°C in the past three
hours
USB CHARGE PORT
The integrated USB charging port (on back) will charge your smart
phone, camera or other devices when the forecast station is plugged
into a power outlet with the included 5V A/C adapter.
Note:
This is a power-output charging port. The charging port does not
supply power to the forecast station.
Begin charging your external device by connecting the device’s USB
charging cable (not included) to the USB
charging port on the back of the forecast station. Charging times will
vary.
Note:
Some USB cables are for data transfer only and cannot be used
for charging. Make sure that the USB cable you use will charge your
device. Most USB cables included with mobile devices will work for
charging.
-USB Power Output: 1A maximum current
-Do NOT overload USB port. Charge 1A devices or less only
HEAT INDEX & DEW POINT TEMPERATURE
HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent
temperature of how hot it feels to a human being. As humidity increases,
the body is unable to cool effectively. The temperature will feel warmer.
View Heat Index:
From normal time and temperature display mode,
press the HEAT/DEW button once and Heat Index will show instead of
the outdoor ambient temperature.
Note:
Heat index will be the same number as the
temperature until the outdoor temperature is above 80
degrees °F (26.7°C).
DEW POINT TEMPERATURE
Dew Point Temperature is the saturation point of the air, or the
temperature to which the air has to cool in order to create condensation.
The higher the dew points, the higher the moisture content of the air at a
given temperature.
View Dew Point Temperature
: From normal time and
temperature display mode, press the HEAT/DEW button
twice and Dew Point temperature will show instead of the
outdoor ambient temperature. The words Dew Point will
show near outdoor temperatures.
Note:
Dew Point temperature is lower than the actual temperature.
TEMPERATURE ALERTS
Press
and release
the TEMP ALERT button to toggle between the
temperature alerts.
Hold
the TEMP ALERT button to set individual high
and low alerts.
The bell icon indicates each alert that is active.
The MAX TEMP button will turn a temperature alert ON.
This button will increase an alert value in Temp Alert set
mode.
The MIN TEMP button will turn a temperature alert OFF.
This button will decrease an alert value in Temp Alert set
mode.
One or all of the HI and LO temperature alerts may be set.
z
Range for indoor temperature alert:
+32°F to +122°F (0°C to 50°C)
z
Range for outdoor temperature alert:
-40°F to 140°F (-40°C to 60°C)
SELECT TEMPERATURE ALERT VALUE
Hold the TEMP ALERT button for five seconds, until the forecast station
beeps, to select and set temperature alert values.
z
OUTDOOR HI
alert will flash. Press the ARROW buttons to set the
alert value, and press the TEMP ALERT button to confirm. Then
press the TEMP ALERT button again switch to OUTDOOR LOW
setting.
z
OUTDOOR LO
alert will flash. Press the ARROW buttons to set the
alert value, and press the TEMP ALERT button to confirm. Then
press the TEMP ALERT button again switch to INDOOR HI setting.
z
INDOOR HI
alert will flash. Press the ARROW buttons to set the alert
value, and press the TEMP ALERT button to confirm. Then press the
TEMP ALERT button again switch to INDOOR LOW setting.
