background image

 

© La Crosse Technology 07 

2/5

 

 

How can I get outdoor temperature to show on the display for the first time or after loss of 

information (i.e. power blackout) 

Bring both units (s transmitter) inside your house and have the units 1 to 2 meters apart with nothing in-
between them.  

1.

 

Remove the batteries from both units, display and remote sensor.  

2.

 

Wait until the display is blank to clear all memory (we recommend one minute).  

3.

 

Put the batteries back into the transmitter.  

4.

 

Taking care NOT to press any keys, reinstall the batteries into the base station.  

Be careful, batteries must be inserted as mentionned hereabove (transmitter first, then in the base station) to 

ensure a good functioning.

 

5.

 

Do not press any keys for at least 10 minutes after installing the batteries

. (Let them establish a good 

connection. Pressing a button during this stage would be enough to stop the search for the sensor which is being 
now carried out by the station). 

An outdoor temperature should be showing on your display. You can now put your outdoor sensor back outside. 

How can I read and reset the MIN/MAX recordings ? 

Press the MIN/MAX key : 

-

 

one time to consult the maximum outdoor temperature recording 

-

 

two times to consult the minimum outdoor temperature recording 

-

 

three times to consult the maximum indoor temperature and humidity recordings 

-

 

four times to consult the minimum indoor temperture and humidity recordings 

To reset the MIN/MAX recordings, you first have to display on the weather clock an indoor or outdoor min/max 
recording (thanks to the MIN/MAX key).  Then, press and hold the SET button for 4 seconds. The indoor temperature 
and humidity and the outdoor temperature MIN/MAX recordings will be simultaneously reset. 

The MINI and MAXI values that appear then on the screen are the current ones. 

What can I do if my display is blank ? 

Check the polarity on your batteries to make sure they are installed according to the diagram in the battery 
compartment. Also make sure that you are using a quality alkaline battery. We advised against reloading batteries. 

Summary of Contents for WS 9711 IT+






Reviews: