background image

 

1. 

First, insert the batteries into the Temperature sensor. 

(see “

Install and replace batteries in the 

Temperature sensor

“).

 

2. 

Immediately after and within 30 seconds, insert the batteries into 

Weather station (see “

I

nstall and 

replace batteries in the Weather station

). Once the batteries are in place, all segments of the 

LCD will light up briefly. Following the time as 12:00 and the "Weather man" icon will be displayed. 
If these are not displayed after 60 seconds, remove the batteries and wait for at least 10 seconds 
before reinserting them. 

3. 

After inserting the batteries, the Weather station will start receiving data from the sensor. The 
outdoor temperature and the signal reception icon should then be displayed on the Weather 
station. If this does not happen after 3 minutes, the batteries will need to be removed from both 
units and reset from step 1. 

4. 

In order to ensure sufficient 915 MHz transmission however, this should under good conditions be 
a distance no more than 100 meters between the final position of the Weather Station and the 

sensor (see notes on “

Mounting

” and “

915 MHz Reception

”).

 

 

Note: 

x

 

If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the 
frequency is changed to 920MHz and the learning is tried another 45 seconds. If still not successful 

 

the reception is tried for 45 seconds on 910MHz. This will also be done for re-synchronization. 

 

BATTERY INSTALLATION 

 

INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION 

The Weather station uses 2 x AA, IEC LR6, 1.5V batteries. To install and 
replace the batteries, please follow the steps below: 
1. 

Remove the cover at the back of the Weather station. 

2. 

Insert batteries observing the correct polarity (see marking). 

3. 

Replace compartment cover. 

 
 
 
 
 
 

 
 

 

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR 

The Temperature Sensor uses 2 x AA, IEC LR6, 1.5V batteries. To install and 
replace the batteries, please follow the steps below: 
1. 

Remove the battery compartment cover at the back of the sensor. 

2. 

Insert the batteries, observing the correct polarity (see marking). 

3. 

Replace the battery compartment cover on the unit. 

 

 
 

 

Note: 

In the event of changing batteries in any of the units, all units need to be reset by following the setting up 
procedures. This is because a random security code is assigned by the sensor at start-up and this code 
must be received and stored by the Weather station in the first 3 minutes of power being supplied to it. 

 

BATTERY CHANGE: 

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units 
(Battery life See 

Specifications

 below). 

 

 

Please participate in the preservation of the environment. Return used batteries to an 
authorised depot. 

 

 

FUNCTION KEYS: 

 

Weather station: 

The weather station has four easy to use function keys. 
 
 
 
 
 
 
 

 
 

SET key

 

IN key

 

+ key

OUT key

 

 

10 

SET key 

x

 

Press and hold the key to enter manual setting modes: Manual time, Calendar, 12/24 hour display 
and Temperature unit °F/°C setting 

 

+ key 

x

 

To make adjustment for various settings

 

 

IN key 

x

 

Press to display the MIN and MAX indoor temperature records 

x

 

Press and hold to reset the indoor MIN/MAX temperature records 

 

OUT key 

x

 

Press to display the MIN and MAX outdoor temperature records 

x

 

Press and hold to reset the outdoor MIN/MAX temperature records 

 
 

 
 

 

11 

LCD SCREEN AND SETTINGS: 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Indoor Relative Humidity %

 

Weather 

Tendency icon

 

Weather Forecast 

icon (Weather 

man)

 

Time

 

Outdoor Temperature  

Outdoor Reception 

Signal*

Indoor Temperature 

 

Receiver Low Battery Indicator

 

 Sensor low battery 

indicator

 

Date

 

Indoor comfort indicator

 

Summary of Contents for WS-9630TWC-IT








Reviews: