28
1.
Lift up the battery compartment
cover.
2.
Insert batteries observing the
correct polarity (see marking).
3.
Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AAA, IEC LR3, 1.5V
battery. To install and replace the batteries, please follow the
steps below:
1.
Remove the battery compartment cover at the back of
the transmitter.
2.
Insert the batteries, observing the correct polarity (see
marking).
3.
Replace the battery compartment cover on the unit.
Note:
In the event of changing batteries in any of the units, all units need to be reset
by following the setting up procedures. This is because a security code is
assigned by the transmitter at start-up and this code must be received and
stored by the Weather station in the first 3 minutes of power being supplied to
it.
