View Outdoor MIN/MAX Data:
Press and release the OUT button to view
the Minimum, Maximum, and Current Outdoor Temperature records. The
Time and Date will flash to show when the Minimum or Maximum
Temperature occurred.
Reset Outdoor MIN/MAX Data
Press and release the OUT button to select
the individual outdoor Max or Min record you wish to reset.
Hold the SET button for five seconds. The record is now reset to the
current
day's reading.
LOW BATTERY:
When this icon appears in the indoor (IN) reading section, replace the
batteries in the Forecast Station.
When this icon appears in the outdoor (OUT) readings section, replace
the batteries in the outdoor transmitter.
POSITIONING THE OUTDOOR TRANSMITTER
To achieve a true temperature reading, avoid mounting where direct sunlight
can reach the remote temperature transmitter or Forecast Station. While the
remote temperature transmitter is weather resistant, avoid submersion in
water or snow. We recommend that you mount the remote temperature
transmitter on an outside North-facing wall. The sending range is 330ft
—
obstacles such as walls, concrete, and large metal objects can reduce the
range. Place both units in their desired location, and wait approximately 15
minutes before permanently mounting to ensure that there is proper
reception.
Wall Mount:
1) Remove the mounting bracket from the remote temperature
transmitter.
2) Place the mounting bracket over the desired shaded location
(wall or table).
3) Through the screw holes of the bracket, mark the mounting
surface with a pencil.
4) Screw mounting bracket onto the mounting surface. Ensure
that the screws are flush with the bracket.
5) Insert the remote temperature transmitter into the bracket.
Note
: Mounting with adhesive tape is not recommended as a permanent
mounting solution. Only use the adhesive tape during set-up process.
POSITION THE WIRELESS FORECAST STATION:
Free Standing:
The Forecast Station comes with the table stand already
attached. Pull the stand out from the back of the Forecast Station and place
in an appropriate location.
Wall Hanging
1) Close the table-stand.
2) Fix a screw (not included) into the desired wall, leaving
approximately 3/16 of an inch (5mm) extended from the
wall.
3) Place the Forecast Station onto the screw using the
hanging hole on the backside.
4) Gently pull the Forecast Station down to lock the screw
into place.
CARE AND MAINTENANCE:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose the Forecast Station to extreme temperatures, vibration or
shock.
Keep the Forecast Station dry.
Clean the Forecast Station with a soft damp cloth. Do not use solvents or
scouring agents.
The Forecast Station is not a toy. Keep it out of reach of children.
The Forecast Station is not to be used for medical purpose or for public
information, but is determined for home use only.
The specifications of this product may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the unit does not work properly, change the batteries.
SPECIFICATIONS:
Indoor Temperature:
14.1 °F to 139.8 °F
(-10°C to +59.9°C)
Update interval:
every 10 seconds
Outdoor Temperature:
-39.8°F to + 139.8°F
(-39.9°C to 59.9°C)
Transmission range:
Up to 330 feet (open air)
Transmission frequency:
915MHz
Update interval:
every 4 seconds
Power Requirements:
Wireless Forecast Station:
2-AA, IEC, LR6 batteries (not included)
TX29U-IT Transmitter:
2-AA, IEC, LR6 batteries (not included)
Dimensions:
Wireless Forecast Station: 5.63" x 3.18" x 1.21"
(143.2 x 80.8 x 30.9mm)
TX29U-IT Transmitter:
5.05" x 1.5" x .83"
(128.27 x 38.1 x 21.08mm)
WARRANTY INFORMATION:
La Crosse Technology, Ltd provides a 1-year limited warranty on this product
against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on
products purchased and used in North America and only to the original
purchaser of this product. To receive warranty service, the purchaser must
contact La Crosse Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La Crosse
Technology, Ltd authorized service center. The original dated bill of sale
must be presented upon request as proof of purchase to La Crosse
Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option
and at no charge as stipulated herein, with new or reconditioned parts or
products if found to be defective during the limited warranty period specified
above. All replaced parts and products become the property of La Crosse
Technology, Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining original warranty, or
ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all
expenses for labor and materials for all repairs covered by this warranty. If
necessary repairs are not covered by this warranty, or if a product is
examined which is not in need or repair, you will be charged for the repairs or
examination. The owner must pay any shipping charges incurred in getting
the La Crosse Technology, Ltd product to a La Crosse Technology, Ltd
authorized service center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused by
accident, unreasonable use or neglect (including the lack of reasonable and
necessary maintenance); (2) damage occurring during shipment (claims must
be presented to the carrier); (3) damage to, or deterioration of, any accessory
or decorative surface; (4) damage resulting from failure to follow instructions
contained in the owner’s manual; (5) damage resulting from the performance
of repairs or alterations by someone other than an authorized La Crosse
Technology, Ltd authorized service center; (6) units used for other than home
use (7) applications and uses that this product was not intended or (8) the
products inability to receive a signal due to any source of interference.. This
warranty covers only actual defects within the product itself, and does not
cover the cost of installation or removal from a fixed installation, normal set-
up or adjustments, claims based on misrepresentation by the seller or
performance variations resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR
PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights
specific to the State. Some States do not allow the exclusion of
consequential or incidental damages therefore the above exclusion of
limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
The complete instruction manual is available at:
http://www.lacrossetechnology.com/9077it
Protected under U.S. Patents:
5,978,738
6,076,044
6,597,990
FCC Disclaimer:
This Device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) the device must accept any interference received,
including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form, even
in excerpts, or duplicated or processed using electronic, mechanical or
chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in
this handbook is regularly checked and corrections made in the next issue.
We accept no liability for technical mistakes or printing errors, or their
consequences.
All trademarks and patents are acknowledged.
Printed in China
