La Crosse Technology, Ltd.
Page 5
Transmitters are water resistant, not waterproof.
A fall can shock the transmitter or the batteries in the transmitter.
Batteries that have fallen on a hard surface may be damaged and unable to
function properly.
Complete a
dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work, but may be unstable in
performance.
Outdoor Transmitter Drains Batteries Quickly
Test a new set of alkaline batteries. Write down the date of installation and the
voltage of the batteries.
When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
and resistance between the transmitter and forecast station.
Transmitters at the end of the range may work while batteries are fresh but not
after they drain a bit.
Check for leaking batteries, which may damage the transmitter.
Battery life is over 24 months when using reputable battery brands for both
Alkaline and Lithium batteries.
Outdoor Temperature/Humidity Is Stuck or OFL
Check
Overpowered or underpowered batteries can cause this
reading.
Replace outdoor transmitter.
Fahrenheit/Celsius
to switch from Fahrenheit to Celsius.
MIN/MAX Temperature Readings
This station will show the minimum and maximum temperatures from setup,
until you reset the min/max temperatures or remove the batteries from the
station.
To view a 24-hour min/max reading, reset the min/max temperatures at the
same time each day.
VIEW INDOOR MIN/MAX RECORDS: Press and release the IN button to display
Indoor Max, Min and Current records.
RESET INDOOR MIN/MAX RECORDS: Press and release the IN button to select
the record you wish to reset either MAX or MIN. Press and hold the SET button
for five seconds. The record will reset to the Current Date, Temperature and
Humidity.
NOTE: Each Min or Max value will need to reset separately.
VIEW OUTDOOR MIN/MAX RECORDS: Press and release the OUT/PLUS button
to display the Outdoor Max, Min and Current records.
RESET OUTDOOR MIN/MAX RECORDS: Press and release the OUT button to
select the record you wish to reset either MAX or MIN. Press and hold the SET
