41
temperature and humidity readings are receivable. In event that the signal
is not received, relocate the sensor(s) or move them slightly as this may
help the signal reception.
CARE AND MAINTENANCE:
•
Extreme temperatures, vibration and shock should be avoided as
these may cause damage to the unit and give inaccurate forecasts
and readings.
•
Precautions shall be taken when handling the batteries. Injuries,
burns, or property damage may be resulted if the batteries are in
contact with conducting materials, heat, corrosive materials or
explosives. The batteries shall be taken out from the unit before the
product is to be stored for a long period of time.
•
Immediately remove all low powered batteries to avoid leakage and
damage. Replace only with new batteries of the recommended type.
•
When cleaning the display and casings, use a soft damp cloth only.
Do not use solvents or scouring agents as they may mark the LCD
and casings.
•
Do not submerge the unit in water.
•
Special care shall be taken when handling a damaged LCD display.
The liquid crystals can be harmful to user's health.
•
Do not make any repair attempts to the unit. Return them to their
original point of purchase for repair by a qualified engineer. Opening
and tampering with the unit may invalidate their guarantee.
•
Never touch the exposed electronic circuit of the device as there is a
danger of electric shock should it become exposed.
•
Do not expose the units to extreme and sudden temperature
changes, this may lead to rapid changes in forecasts and readings
and thereby reduce their accuracy.
SPECIFICATIONS:
Temperature measuring range:
Indoor
: 14.2ºF to 139.8ºF with 0.2ºF resolution
-9.9ºC
to
+59.9ºC
with
0.1°C
resolution
(“OF.L” displayed if outside this range)
Outdoor
: -39.8ºF to +139.8ºF with 0.2ºF resolution
-39.9ºC
to
+59.9ºC
with
0.1°C
resolution
(“OF.L” displayed if outside this range)
Indoor humidity range : 1% to 99% with 1% resolution
(Display “- -“ if temperature is OL.F; display “- -“ if < 1% and “99%” if >
99%)
Outdoor humidity range : 1% to 99% with 1% resolution
(Display “- -“ if outside temperature is OF.L; display 1% if < 1% and 99% if
> 99%)
