4 |
P a g e
HOW DO I MANUALLY SET THE TIME?
The SET button will move you through the program menu. The MIN/MAX button will change a
value.
Setting order:
12/24 hour time
Hour
Minutes
1.
Hold the SET button for 5 seconds and a 12h or 24h will appear on the top line. To change
between 12h and 24h, press and release the MIN/MAX button.
Note: 12 hour time will show temperature in Fahrenheit. 24-hour time will show Temperature
in Celsius.
2.
The Hour will now be flashing. Press and release the MIN/MAX button until the correct hour
is shown. WATCH the AM/PM.
3.
The Minutes will now be flashing. Press and release the MIN/MAX button until the correct
minutes are displayed. Press and release the SET button once more and you are done.
Note: When in the 12h mode, there is only a 'PM' display, which appears under the word
TIME. During the 'AM' hours this area will be blank. When the correct hour is shown, press
and release the SET button once.
DOES THIS STATION HAVE 12 HOUR AND 24 HOUR TIME OPTIONS?
•
Yes, you can select 12 hour or 24 hour time format in the
TROUBLESHOOTING
FACTORY RESET: HOW DO I FACTORY RESET MY STATION?
•
A factory reset is a great way to return your station to “out of the box” condition.
To factory reset your station:
1.
Remove batteries from your sensor and your station. Press any button on the station 20
times to help discharge collected power.
2.
Wait 15 minutes then insert batteries into the sensor and the station and allow both piesec to
sit together for 15 minutes.
