La Crosse Technology WS-8249U Instruction Manual Download Page 8

 

8

Note: 

The unit will still try to receive the signal every day despite it being manually set. When it does 
receive the signal, it will change the manually set time into the received time. During reception 
attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB 
tower icon will not appear but reception will still be attempted the following hour. 

 

WWVB time reception takes place from 12:00 am through 6:00 am each day (attempts WWVB 
reception every full hour within this  time frame). When the time signal is received for example at 
1:00 am, the atomic clock will not attempt to receive the WWVB signal for the remaining hours 
until 6:00 am. Therefore, the next signal attempt will take place between 12:00 am and 6:00 am 
the next day. The other times WWVB reception takes place, are upon setup and after manual 
time set exiting mode. Reception is generally not possible during daylight hours due to the 
interference of the sun. 

 

YEAR SETTING 

The year can be selected sequentially from 2003 to 2029 and will then start over again (default 
setting 2004). None of the digits of the year will  be visible on the lower LCD display however the 
year must be correct as it affects the day of the week display. 
1. 

The year digits will start flashing in the lower LCD. 

2. 

Press and release the 

+

 key to select the desired year. 

3. 

Press and release the 

SET

 key to confirm the Year setting and continue to the Month 

setting. 

 

MONTH SETTING 

1. 

The month digits on LCD2 will start flashing. 

2. 

Press and release the 

+

 key to select the desired month. 

3. 

Press and release the 

SET

 key to confirm the Month setting and continue to the Date 

setting. 

 

DATE SETTING 

1. 

The digits for the date will start flashing in the lower LCD (Default setting 1). 

2. 

Press and release the 

+

 key to select the desired date. 

3. 

Press and release the 

SET

 key to confirm the Date setting and exit the manual setting 

mode. 

Note: 

The date can only be set in conjunction with the selected month. For example, it is not 

possible to set the date 30 if the month of February is selected. 

Summary of Contents for WS-8249U





















Reviews: