background image

 

14

FEATURES OF THE WS-7390U 
 
I. Weather Forecast 
 

The weather forecasting feature is estimated to be 75% accurate. 

By adjusting the sensitivity setting, you can achieve a better 
accuracy of forecast. The weather forecast is based solely upon the 
change of air pressure over time. In areas where the weather is not 
affected by the change of air pressure, this feature will be less 
accurate. 

 

1. Weather Icons 
 

There are 3 possible weather icons that will be displayed 

in the TENDENCY LCD:   

 

Sunny

—indicates that the weather is expected to improve 

(not that the weather will be sunny). 

Sun with Clouds

—indicates that the weather is expected 

to be fair (not that the weather will be sunny with clouds). 

Clouds with Rain

—indicates that the weather is expected 

to get worse (not that the weather will be rainy). 

 
 
 
 
 
 
 
The weather icons change when the unit detects a change 

in air pressure. The icons change in order, from “sunny” 
to “partly sunny” to “cloudy”. It will not change from 
“sunny” directly to “rainy”, although it is possible for the 
change to occur quickly. If the symbols do not change 

Summary of Contents for WS-7390U



























Reviews: