6
(appearing in the TIME LCD) will flash when a search is
in progress, will remain steady when the signal has been
received, and nothing will be displayed in all other
situations. If the WWVB time has not been received after
10 minutes of battery installation, you may manually set
the time or leave the time function alone (reception will
occur regardless).
III. MANUAL TIME SETTING
1. Press and hold the
MODE/SET
button for 5
seconds, or until “Lcd 5” flashes in the
TIME LCD.
2. Press
the
MODE/SET
button two more
times. The digit representing the hour
should be flashing.
3. Press
the
CH/+
button to select the
appropriate hour.
Note:
In 12h mode, “PM” will appear to the left
of the time during PM hours. If the time is not
within the PM hours nothing will be displayed.
Be sure to set the time to the correct AM/PM
time to ensure automatic reception.
4. Press
the
MODE/SET
button to set the
minutes. The digits that represent the
minutes will flash.
5. Press
the
CH/+
button to advance the
minutes.
6. Press
the
MODE/SET
button to confirm and
advance to the time zone setting.
