background image

MAINTENANCE & CARE 
 

• 

Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units.

 

• 

Clean displays and units with a soft, damp cloth.  Do not use solvents or scouring agents—they may mark and damage the displays and 
casings.

 

• 

Do not submerge in water.

 

• 

Immediately remove all low powered batteries to avoid leakage and damage.  Replace with new batteries only, and of recommended size.

 

• 

Opening the casings invalidates the warranty.  Do not try to repair the units.  Contact La Crosse Technology for Repairs.

 

 
 

TROUBLESHOOTING 

Problem: 

The LCD is faint. 

Solution: 

1) Replace the batteries. 

Problem: 

“OFL” appears in the LCD. 

Solution: 

1) Move unit to an area with warmer or cooler surrounding 
temperature.  Current surrounding temperatures are outside 
measuring range. 

Problem: 

No reception of WWVB signal. 

Solution: 

1)  It may help reception to face the front of the Atomic Clock in 

the general direction of Ft. Collins, Colorado. 

2)  Wait overnight for signal. 
3)  Be sure the Atomic Clock is at least 6 feet from any electrical 

devices, i.e. TV sets, computers, or other radio controlled 
clocks. 

4)  Remove batteries for five minutes, reinsert and leave the unit 

alone overnight without pressing buttons. 

5)  If problems persist contact La Crosse Technology. 

Problem: 

Hour is incorrect (minute and date are correct). 

Solution: 

1) Be sure correct time zone and daylight saving time are 
selected. 

 

Note:

 For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional 

manual. 
 

SPECIFICATIONS 

Temperature:

 

Measuring range: 

32

°

F to 122

°

F with 0.2

°

F resolution 

(0

°

C to 50

°

C with 0.1

°

C resolution) 

Outside range: 

“OFL” will be displayed 

Checking intervals: 

Every 10 seconds 

Power source:

 

Battery type: 

2 x AA, IEC LR6, 1.5V (Alkaline) 

Battery life: 

Approximately 12 months 

Dimensions (L x W x H): 

8.3 x 1.2 x 8.4 in (211.8 x 30.5 x 
214.4mm) 

 
 
 
 
 
 
 
 
 
 
 

 

6

Summary of Contents for WS-6003U








Reviews: