manualshive.com logo in svg

La Crosse Technology WS-6002U, Instruction Manual, Page: 13 / 15

Share
Download
La Crosse Technology WS-6002U Instruction Manual Download Page 13

 

13

computers, or other radio controlled clocks. 

4) Remove batteries for five minutes, reinsert 

and leave the unit alone overnight without 
pressing buttons. 

5) If problems persist contact La Crosse 

Technology. 

Problem: 

Hour is incorrect (minute and date are correct). 

Solution: 

1) Be sure correct time zone and daylight 
saving time are selected. 

 

Note: For any questions not answered, contact La Crosse 
Technology with the contact information found at the end of this 
instructional manual. 
 
SPECIFICATIONS 
Temperature:

 

Measuring 
range: 

32

°

F to 122

°

F with 0.2

°

F resolution 

(0

°

C to 50

°

C with 0.1

°

C resolution) 

Outside 
range: 

“OFL” will be displayed 

Checking 
intervals: 

Every 10 seconds 

Power source:

 

Battery type: 

2 x AA, IEC LR6, 1.5V (Alkaline) 

Battery life: 

Approximately 12 months 

Dimensions  
(L x W x H): 

8.3 x 1.2 x 8.4 in  
(211.8 x 30.5 x 214.4mm) 

 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for WS-6002U
















Reviews:

No comments