background image

7

Indoor Temperature readings-

Shows dashes or is missing-

•  Please note the humidity range is 20-99%. Below 20% you may see dashes.

•  Check A/C connection and Batteries-This is almost always a power issue.

Time and Date information-

Time is not accurate of “jumps” time.

•  Be sure your Time Zone is correct.

•  Remove scratch guard.

•  Has it connected with WWVB? Allow up to 5 nights for this to connect due to atmospheric  

  interferences.

Date changes at noon rather than midnight

•  Time Zone is incorrect.

Weather Station Beeps-

•  Alarm is on.

•  Low power

•  Button is depressed. 

Forecast Icons Incorrect

•  Set your elevation in the Pressure area.

•  Allow 48-60 hours after set up to acclimate to your area.

Display Information

Display is blank

•  Check A/C cord and Batteries. Is A/C cord plugged into a live outlet and not one that must  

  be turned on with a switch.

•  Be sure batteries have not leaked

Missing segments-

•  Check A/C connection and Batteries

•  This is almost always a power issue.

•  Complete a restart.

Black spot on LCD

•  This is likely due to impact and not a warranty issue.

W177.indd   7

9/15/07   10:21:37 AM

Summary of Contents for WS-450B











Reviews: