background image

 

29

of, any accessory or decorative surface; (4) damage resulting 
from failure to follow instructions contained in your owner’s 
manual; (5) damage resulting from the performance of repairs or 
alterations by someone other than an authorized La Crosse 
Technology, Ltd authorized service center; (6) units used for 
other than home use (7) applications and uses that this product 
was not intended or (8) the products inability to receive a signal 
due to any source of interference.  This warranty covers only 
actual defects within the product itself, and does not cover the 
cost of installation or removal from a fixed installation, normal 
set-up or adjustments, claims based on misrepresentation by the 
seller or performance variations resulting from installation-related 
circumstances. 

 

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME 
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, 
OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE 
OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS 
PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES 
OR FOR PUBLIC INFORMATION.  THIS PRODUCT IS NOT A 
TOY.  KEEP OUT OF CHILDREN’S REACH. 

 

This warranty gives you specific legal rights.  You may also have 
other rights specific to your State.  Some States do no allow the 
exclusion of consequential or incidental damages therefore the 
above exclusion of limitation may not apply to you. 

 

For warranty work, technical support, or information contact: 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for WS-3610U































Reviews: