Page 6
Page 5
Page | 4
WARRANTY INFO
La Crosse Technology, Ltd. provides a
1-year limited time warranty
(from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
CARE + MAINTENANCE
•
Do not mix old and new batteries.
•
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•
Always purchase the correct size and grade of battery most suitable for intended use.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries have with correct polarity (+ / -).
•
Remove batteries from equipment that will not to be used for an extended period.
•
Promptly remove expired batteries.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING:
This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to:
BUTTON FUNCTIONS
MODE
Hold to enter the Settings Menu.
+ (PLUS)
Press to adjust values. Hold to increase quickly.
WE’RE HERE TO HELP!
If you require additional support, get in touch with our friendly
customer support team based out of La Crosse, WI.
Phone:
1-608-782-1610
Online:
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
SPECIFICATIONS
Measuring range:
-
13ºF to +158ºF (Fahrenheit only)
Accuracy*:
32ºF to 122ºF ± 1.8ºF, otherwise ± 2.7ºF
Resolution:
0.1ºF (0.1ºF)
Battery:
1 “AAA” LR3 alkaline battery (included)
Receiver:
3.75” L x 0.75” W x 4.00” H
*Direct sunlight may inflate temperature readings
LOW BATTERY
When the Low Battery Icon appears on the LCD, a battery
change will soon be needed.
1. Grasp both side of the thermometer and pull back firmly.
2. Use a screwdriver to remove the Battery Cover and replace the
AAA battery.
3. With the cover securely screwed back in place, reattach the
thermometer to the Mounting Bracket.
REMOVE MOUNTING BRACKET FROM WINDOW
The bracket is attached via strong adhesive tape.
1. To remove, gently slide a flat blade under one of the Adhesive
Strips. Slowly and firmly pull that end away from the window.
2. Repeat step 1 with the other side of the Mounting Bracket.
Note:
The adhesive will not release unless you pull slowly. You
may need to replace the adhesive tape once the mounting
bracket has been removed.
