Model: W88723 www.lacrossetechnology.com/support
Page | 3
USB CHARGING PORT
Charge a smart phone, camera or other devices when the
alarm clock is plugged into a power outlet with the
included 5V AC adapter.
•
Connect your external device’s USB charging cable
(not included) to the USB charging port.
•
Charging times will vary.
•
USB Power Output:
1A maximum current. Charge 1A devices or
devices that are self-regulating.
NOTE:
This is a power-output charging port. It does not supply power to
the alarm clock.
NOTE:
Some USB cables are for data transfer only and cannot be used
for charging. Make sure that the USB cable you use will charge your
device. Most USB cables included with mobile devices will work for
charging.
SET TIME ALARMS
Setting the alarm and activating the alarms are separate
actions.
1. Press and release the
ALARM
button to select Alarm 1
or Alarm 2.
2. Hold the
ALARM
button for 5 seconds to enter alarm
time set mode. The alarm hour will flash.
3. Press the
+
or
-
buttons
to adjust the alarm hour.
4. Press the
ALARM
button to confirm and move to the
alarm minutes.
5. Press the
+
or
-
buttons
to adjust the alarm minutes.
6. Press the
ALARM
button to confirm and exit.
Alarm Time setting order:
1. Hours, 2. Minutes
Note:
The alarm is crescendo sound. The alarm will sound for 2 minutes
and then shut off completely if no buttons are pressed.
ACTIVATE/DEACTIVATE TIME ALARM
•
Press and release the
ALARM
button to select Alarm 1
or Alarm 2.
•
Press the
ALARM ON/OFF
button to activate the
selected alarm. Once activated, the bell icon appears.
•
Press the
ALARM
ON/OFF
button again to deactivate the
selected alarm. The bell icon will disappear.
Alarm Bell
