17
SENSORS
18
Add-On Sensors
Whether you choose to connect to the La Crosse
View app or not, this station can display data for up
to 4 extra sensors. This data will appear in the red
section on the LCD and in your La Crosse View app
if connected.
Note:
When first powering up, or after a factory reset,
extra sensors should automatically connect to your station.
2.
Install batteries into your sensor. If the sensor
has a
TX
button, press it to force a transmission
signal. This button is usually located in or near
the sensor’s battery compartment. The LED light
on the sensor will flash once.
3.
Your sensor should connect within the next 3
minutes, briefly displaying its ID and type on the
LCD. The Sensor Reception Indicator will show
solid on the screen when a sensor is connected.
Adding Sensors to Your Station
Viewing Add-On Sensor Data
1.
Hold the
EXTRA SENSOR
button until the
Sensor Reception Indicator starts to animate.
If you have multiple add-on sensors connected, press
the
EXTRA SENSOR
button to cycle through the data
you’d like displayed on the LCD. The Auto Scroll Icon
( ) will appear if activated. This setting will also
include relative pressure data in the cycle.
Specifications
APPENDIX
Wi-Fi NETWORK REQUIREMENTS
• Broadcast Frequency:
2.4GHz (802.11 b/g/n)
• Network Name/Password:
Must Not Exceed 45
Characters
• Network Speed:
Must Be Greater than 1 Mbps
Note:
If you have multiple band router, this device will
connect to the
2.4GHz
band when connecting to Wi-Fi.
MOBILE REQUIREMENTS
•
Apple phones require iOS with cellular or Wi-Fi service.
•
Android phones require Android OS with cellular or
Wi-Fi service.
STATION SPECIFICATIONS (V10v2)
• Indoor Temperature Range:
32°F to 122°F
(0°C to 50°C)
• Indoor Humidity Range:
10 to 99%RH
• Relative Pressure Range:
23.62 to 32.48 InHg
(800 to 1100 hPa)
• Power Requirements:
•
Primary Power:
5.0V Adapter (included)
•
Battery Backup:
1 “CR2032” Coin Cell Battery
(included)
• Station Dimensions:
7.80 in. L x 1.23 in. W x 6.44 in. H
(19.81 cm L x 3.12 cm W x 16.35 cm H)
• LCD Brightness:
4 Intensity OFF
(Programmable Auto-Dim Backlight Option)
• Language Options:
English, Spanish, and French
(Translation Available for Menus & Calendar)
SENSOR SPECIFICATIONS (LTV-TH2i)
• Outdoor Temperature Range:
-40°F to 140°F
(-40°C to 60°C)
• Outdoor Humidity Range:
10 to 99%RH
• Transmission Range:
400 feet (121 Meters) open air
• Power Requirements:
2 “AA” Batteries (not included)
• Sensor Dimensions:
1.97 in. L x 0.75 in. W x 5.73 in. H
(5.0 cm L x 1.91 cm W x 14.55 cm H)
* Water Leak Sensor shown as example, sensor not included
Inside of Water Leak Sensor*
Top of Water Leak Sensor*
Find all of your add-on
sensor options by scanning
the QR code or visiting:
Care & Maintenance
Battery Replacement Instructions
When batteries of different brand or type are used together,
or new and old batteries are used together, some batteries
may be over-discharged due to a difference of voltage or
capacity. This can result in venting, leakage, and rupture and
may cause personal injury.
•
Always purchase the correct size and grade of battery
most suitable for the intended use.
•
Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
different types.
•
Clean the battery contacts and also those of the device
prior to battery installation.
•
Ensure the batteries are installed correctly with regard to
polarity (+ and -).
•
Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this
product.
•
Remove used batteries promptly.
•
For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone
directory for local recycling centers and/or follow local
government regulations.
