background image

Temperature | Humidity Trend Arrows

The temperature and humidity trend indicators update with every 30 

minutes and look back over the past 3 hours. 

• Change in temperature (2°F / 1°C). 

• Change in humidity (3%RH).

• 3 hrs comparison which changes on every 1/4 hour

E.g.: At 1:00 -compare to 10:00 data; at 1:30 -compare to 10:30 etc.

Up Arrow:

 risen in past 3 hours

Down Arrow:

 fallen in past 3 hours

Sensor Search

• Hold the 

INFO

 button for 3 seconds to search for the remote 

   temperature/humidity sensor.

• The strength signal icon will animate until the sensor signal is 
   received, or for 3 minutes if no signal available. 

Right Arrow:

 no change in past 3 hours

MIN | MAX Temperature/Humidity 

The station automatically resets minimum and maximum values daily 

at midnight (12:00 AM). 

• Press and release the 

MINMAX/-

 button to view minimum and 

  maximum values.   

• Hold the 

MINMAX/-

 button to manually reset minimum and 

  maximum values. 

MOON PHASE

REMOTE

INDOOR

ALARM

CH

SIGNAL

D

M

Y

MOON PHASE

REMOTE

INDOOR

ALARM

CH

SIGNAL

D

M

Y

T83646v2        www.lacrossetechnology.com/support           Page | 6

Summary of Contents for T83646v2













Reviews: