background image

La Crosse Technology, Ltd.            www.lacrossetechnology.com/support 

Page 12 

 

No WWVB Tower Icon 

 

 

The forecast station has not received a WWVB time signal in the past 24-hours. 

 

Position

 the forecast station for better reception. 

 

Be sure you have good batteries in the forecast station.  

 

Hold the + and – buttons together to send the forecast station on a signal search at 

night. 

 

Allow up to 5 nights to receive the time signal. 

 

Time is off by hours 

 

 

Check to see if the 

WWVB

 Tower icon appears on the forecast station. If not, the 

forecast station has not received a WWVB time signal in the past 24-hours.  

 

Reposition the forecast station with the front or back facing Colorado. 

 

Check that the Time Zone selected correctly reflects your location. Adjust the time 

zone in the 

Program Menu.

 

 

Check that the DST indicator is correct for your location (most areas observe DST so 

this should be ON). Adjust the DST indicator in the 

Program Menu.

 

 

Manually Set Time/Date:  Program Menu 

 

The TIME SET button will move through the program menu. To change a value use the 

ARROW buttons. 

1.

 

WWVB ON/OFF: Hold the TIME SET button five seconds so WWVB and the word ON 

will flash. Press and release either ARROW button to turn this to OFF if you do not 

wish WWVB time reception. Confirm with the TIME SET button and move to time zone. 

2.

 

TIME ZONE:  EST will flash. Press and release the ▲ or ▼ buttons to select a different 

Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific, 

AKT= Alaska, HAT=Hawaiian time zone. Confirm with the TIME SET button and move 

to DST. 

3.

 

DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the ▲ or 

▼ buttons to turn this to OFF if you do not observe DST. Confirm with the TIME SET 

button and move to 12/24 hour time. 

4.

 

12/24 HOUR TIME: 12H will flash. Press and release the ▲ or ▼ buttons to select 24H. 

Confirm with the TIME SET button and move to the hour. 

5.

 

HOUR: The hour will flash. Press and release the ▲ or ▼ buttons to select the correct 

hour. Confirm with the TIME SET button and move to the minutes. 

6.

 

MINUTES: The minutes will flash. Press and release the ▲ or ▼ buttons to adjust the 

minutes. Confirm with the TIME SET button and move to the year. 

7.

 

YEAR: The year will flash. Press and release the ▲ or ▼ buttons to select the correct 

year. Confirm with the TIME SET button and move to the month. 

8.

 

MONTH: The month will flash. Press and release the ▲ or ▼ buttons to select the 

correct month. Confirm with the TIME SET button and move to the date. 

9.

 

DATE: The date will flash. Press and release the ▲ or ▼ buttons to select the correct 

date. Confirm with the TIME SET button and move to F/C. 

10.

 

Note: The Day of the Week will set automatically when the year, month and date are 

set. 

Summary of Contents for S88907V2















Reviews: