Model: S88785 www.lacrossetechnology.com/support Page | 4
Detailed Setup: Weather Station and Remote Sensor
STEP 1:
Insert the 5-volt A/C power adapter into the designated area on the back of the
Weather station.
Plug the A/C power adapter into a wall outlet for continuous backlight (ON/OFF),
and dimmer feature.
STEP 2:
Ensure that the sensor is within 10 feet of the Weather station.
Remove battery cover from sensor. Slide the battery cover down and lift off the
front of the sensor.
Insert two new AA batteries into the TX143TH sensor. Observe the correct
polarity.
Within three minutes, the Weather station will show readings in the
outdoor temperature area on the LCD.
Note:
Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
Button Functions
▼
(Down) Button:
Setting Modes-
Press to decrease values during setting.
Hold
2 seconds to quickly adjust values.
Temperature Alert-
Press to arm or disarm temperature alerts
LIGHT Button:
Default Time Display-
Press to change the LCD backlight brightness. HI/LOW/OFF
Time Alarm-
Press to activate the snooze function when alarming
SET Button:
Default Time Display-
Hold
for 3 seconds to set time/calendar, etc.
The weather station has 7 buttons across the front.