09
10
Viewing Your Temperature & Humidity Data
Temperature & Humidity Records and Alerts
TEMPERATURE & HUMIDITY
TEMPERATURE & HUMIDITY
Viewing Records
Resetting Individual Temperature
and Records
Records Viewing Order
“Feels Like” Temperature
Press the
TEMP
button to toggle through
indoor/outdoor temperature & humidity
records with time and date stamps.
Press the
TEMP
button to view the
individual temperature & humidity
values you’d like to reset.
Next, hold the
MINUS (-)
button.
This reading is now reset to your
current temperature or humidity value.
This reading indicates either Wind Chill or Heat index
values when conditions have been met.
*
An add-on Thermo-Hygro (TH) Sensor must be connected
to view readings separate from you Breeze Sensor.
•
Outdoor High Temperature
•
Outdoor Low Temperature
•
Outdoor High Humidity
•
Outdoor Low Humidity
•
Indoor High Temperature
•
Indoor Low Temperature
•
Indoor High Humidity
•
Indoor Low Humidity
•
“Feels Like” High Temperature
•
“Feels Like” Low Temperature
•
Dew Point
1.
2.
3.
•
Wind Chill:
When temperature is below 50°F and
there is 5+ MPH sustained wind speed.
•
Heat Index:
When temperature is above 80°F.
•
Current Temperature:
When the temperature is
between 41°F and 79°F, the reading will remain
the same as the outdoor value regardless of
humidity or wind speed.
1. OUTDOOR TEMPERATURE
Current Outdoor Temperature
2. TH SENSOR RECEPTION ICON*
Appears if readings are provided by an add-on
TH sensor
3. Cycle Mode Icon
Indicates if the indoor/outdoor data is set to cycle
5. OUTDOOR HUMIDITY
Current Outdoor Humidity
4. HI/LO OUTDOOR TEMPERATURE ALERTS
Appears if a temperature alert is set and active
6. HI/LO OUTDOOR HUMIDITY ALERTS
Appears if a humidity alert is set and active
7. “FEELS LIKE” TEMPERATURE
Based on current outdoor temperature and
wind speed (heat index & wind chill)
2
3
4
5
6
1
7
Indoor/Outdoor Readings
If you wish to see both indoor/outdoor data,
press the
PLUS (+)
button until the Cycle
Mode Icon appears. Your display will now
automatically alternate between indoor and
outdoor data.
Indoor Temperature & Humidity Display
Outdoor Temperature & Humidity Display
1.
Hold the
ALERTS
button for to enter the
Alert Settings Menu.
2.
Use the
+/-
buttons to turn alerts on/off
and to adjust specific alert values. Press
the
ALERTS
button to confirm your
selection.
3.
Your alert is active when the icon (HI alert)
and/or icon (LO alert) is on.
Setting the Temp. & Humidity Alerts
Important Notes:
•
The alert is defaulted to be off.
•
When the armed alert value is reached, the station
will beep and the icon will flash. Press any button
to stop the alert sound.
•
The Alert Icon will remain flashing until the
current conditions are no longer within the set
alert range.
The alert icons will appear on the temperature &
humidity section of the LCD when active.
