48
Therefore, user is recommend to place the battery with the highest expected charging
current at Compartment 1 first. To release the restriction of setting charging current, user
shall take out all four rechargeable batteries from the charging unit.
To change the operating mode during charging, one can press the MODE key (for
selecting all rechargeable batteries) or NUMBER key then MODE key (for selecting
individual rechargeable battery). 8 seconds after the last key press the LCD will blink one
time to indicate the end of changing.
When overheating condition occurs (over about 53°C, usually due to too high a charging
current selected), the charging will be stopped immediately for all channels charging and
discharging, and the display will shown “000 mA”, the charging process will only resume
once the temperature of the rechargeable batteries drops to a safe level. If overheat
conditions continue to occur, the rechargeable batteries shall be taken out to cool down
and then charged at a lower current.
When the battery is overheated the
charging will ceases automatically
for
ALL channels
. “000 mA” will be
displayed.
