1. Press
and
hold down the “SNOOZE/
24HR AL
/
” key until the time on the
LCD starts flashing.
2.
Now manually set the time in hours and minutes by pressing the “
AL/HR
” and
“AL/MIN” keys respectively. (Pressing these keys continuously moves the
hours consecutively by 1 and moves the minutes consecutively by 5)
3.
When the time is set, press the “SNOOZE/
24HR AL
/
” key
to confirm
or wait
for approximately 8
(leaving the automatic time set mode, digits stop blinking
).
Note:
The unit will still try and receive the signal despite the time being manually
set. When it receives the signal,
then the DCF tower icon will stay fixed on
the LCD.
If reception has been unsuccessful, then the DCF tower icon will
disappear but reception will still be attempted the following hour.
TIME ZONE SETTING:
To change to a different time zone (±9 hours):
1. Press
and
hold down the “SNOOZE/
24HR AL
/
” key to enter the time setting
mode
2.
Press the “SNOOZE/
24HR AL
/
” key once more, the time zone and snooze
time setting will be displayed at the lower part of the LCD (Left digit = Time
zone, right digit = Snooze)
3.
Using the “
AL/HR
” key to select the desired time zone. Each press changes
the digits by 1
hour.
4.
When the desired time zone is selected, press the “SNOOZE/
24HR AL
/
”
key to confirm or wait approximately 8 seconds to automatically return to the
normal mode display.
Note:
If the time zone is changed, the calendar display will not change to the new
time zone.
SNOOZE SETTING:
The snooze time is set
as default for 5 minutes by the manufacturer
. The actual
snooze time required should be displayed as one
minute less
than in the snooze
time setting
. This is because it activates from the start of next minute after the
“SNOOZE” key was pressed – it does not count the current minute that it was
pressed in.
0 = Central Europe
For example: if the alarm is set at 7:00 and 10 minutes snooze time is required so
that when pressed it will go on again at 7:10, then 9 minutes has to be set as the
snooze time.
Time zone
Snooze time
