background image

10 

 

 

 

Contact Support: 1-608-782-1610 
Product Registration: 
 

www.lacrossetechnology.com/support/register

  

 
 
 
 
 

 
Online at: 

http://www.lacrossetechnology.com/8140

   

 
Protected under U.S. Patents: 
5,978,738 
6,076,044 
6,597,990 
 
 

 

FCC Disclaimer 

 

RF Exposure mobile: 

The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm (8 inches) 
from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." 
  

Statement according to FCC part 15.19: 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation. 

Statement according to FCC part 15.21: 

Modifications not expressly approved by this company could void the user's authority to operate the equipment. 
 

Statement according to FCC part 15.105: 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help                                                                                                                                  

 
All rights reserved.  This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using 
electronic, mechanical or chemical procedures without written permission of the publisher. 
This handbook may contain mistakes and printing errors.  The information in this handbook is regularly checked and corrections 
made in the next issue.  We accept no liability for technical mistakes or printing errors, or their consequences. 
All trademarks and patents are acknowledged. 

Summary of Contents for KWS-8140U-IT











Reviews: