8
ALARM SET:
Hold the ALARM button for 5 seconds to enter the alarm time set mode.
1. The alarm
hour
digit will flash.
2. Press and release the +/TEMP or -/TIME buttons to select the hour.
3. Press and release the
SET
button to set the minutes. The
minute
digits will flash.
4. Press and release the +/TEMP or -/TIME
buttons
to select the minutes.
5. Confirm with the
SET
button and exit.
6. The alarm icon
will show after the minutes indicating the alarm is
active
.
7. The alarm icon will flash when the alarm is sounding.
DEACTIVATE ALARM:
1. Press and release the ALARM button once to show Alarm Time.
2. Press and release the ALARM button to
deactivate
the Alarm. The
alarm icon will disappear
indicating the alarm is no longer active.
SNOOZE:
1.
When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 10 minutes.
The snooze icon
Zz
will flash when the snooze feature is active.
2. To stop alarm for one day, press ALARM button, while in snooze mode. The alarm icon will remain
solid.
Note:
When the alarm sounds, it continues for 2 minutes and then shuts off completely.
BACKLIGHT AND PROJECTION INTENSITY
: Hold two seconds, and then release the SNOOZE/LIGHT
button to adjust the brightness of the backlight and projection (together):
ON High
intensity:
(default setting on a/c power)
ON Low intensity:
Hold and release SNOOZE/LIGHT button once
OFF
: Hold and release SNOOZE/LIGHT button
ON High intensity (default)
: Hold and release SNOOZE/LIGHT button
PROJECTION:
Battery Power:
Press and release the
SNOOZE/LIGHT button to
show the projection for 10 seconds.
Note:
Projection will not display constantly when operating on battery power.
A/C Power
: Projection is displayed constantly
Note
: can be turned off see “
Backlight and Projection Intensity
”
Rotate Projection:
Press and release the PROJECT button to rotate projection image 90 degrees on
the wall or ceiling. Press and release the PROJECT button again to rotate another 90 degrees.
Change Projection Mode:
Hold two seconds, and then release the PROJECT button to switch
projection modes. You will need to watch the projection image to view the changes.
o
Time and Outdoor Temperature:
alternate
every 5 seconds (default)
o
Time
: Hold and release PROJECT button
o
Outdoor Temperature
: Hold and release PROJECT button again
Note:
Both Time and Outdoor Temperature will not show at the same time
Projection Arm Rotation:
The projection arm can be rotated 180 degrees to
view the projection on the wall or ceiling.