10
USE MULTIPLE OUTDOOR TRANSMITTERS:
The Forecast Station will accommodate up to three remote outdoor transmitters (TX14TH). The channel
selection button
allows you to easily see the temperature in various locations: outdoors, baby’s room,
greenhouse, basement, etc.
To connect multiple remote transmitters to the Forecast Station:
1. Remove the battery cover from all the transmitters (Leave battery covers
off until all transmitters are received by the Forecast Station).
2. Set the first outdoor transmitter to Channel 1 and insert 2-AA batteries.
3. Set the second outdoor transmitter to Channel 2 and insert 2-AA
batteries.
4. Set the third outdoor transmitter to Channel 3 and insert 2-AA batteries.
5. Press and hold CH button on Forecast Station until a beep sounds. The
Forecast Station will search for all outdoor transmitters.
6. Press the TX button on the back of each outdoor transmitter to transmit
RF signal.
7. When RF connection is established, the respective temperature &
humidity for each of the selected channels will appear on the main unit.
8. Allow the transmitters and the Forecast Station to stay 5-10 feet apart for 15 minutes to establish a
solid connection.
9. Install the battery covers on each sensor.
10.
After 15 minutes place the remote transmitters in appropriate locations (see “
position the outdoor
transmitter
”).
Press and release the CH button to view channel 1, 2 or 3 on the Forecast Station when multiple
transmitters are used.
Note:
You cannot change channels if only one transmitter is connected.
CHANNEL SCROLL
: Press and release the CH button until you see the word
AUTO
appear in the
outdoor data area. The Forecast Station will automatically rotate through the channels for all connected
transmitters.
Press and release the CH button to lock the Forecast Station into one channel. Then view channels
individually with a press of the CH button.
OTHER FORECAST STATION ICONS:
Indoor readings
(Temperature, Humidity, Dew Point, Heat Index)
Outdoor Channel indicator:
The number 1, 2 or 3 for will display next to this icon indicating
which transmitter the Forecast Station is reading. Press and release the CH button to view
other channels when using multiple sensors.
AUTO
When this word appears the outdoor temperature/humidity readings will automatically switch
between channels (when using multiple sensors). Press and release the CH button to display only one
channel.
Zz
–
Snooze icon
Will flash when snooze feature has been activated
Solid when alarm is on
Does not display when alarm is deactivated.
Alarm icon
Shows when time alarm is on
Does not display when time alarm is deactivated
