La Crosse Technology K2-100 User Manual Download

Page: 8 / 11

Altitude Graph Display

Altitude User Log Memory

Recording Display

Altitude Graph Display

Free
Record
Display

Free Record Graph Display

start/stop

button

adjust &

start/stop

button

lap/reset

button

lap/reset

button

mode

button

adjust &

start/stop

mode

button

flashing

indicator

the user log memories
start recording

user log memory
log book indicator

log book
indicator

total no. of
free records

time span
of this
segment

the 1st
altitude
memory

the altitude
memory

total no. of the
memory segments
are in use

the date which
this memory
segment
was recorded

the memory
number

the history
graph

the time which
this memory segment
was started

the time which
this memory
segment
was started

the segment
number

5.11 Altimeter Mode

- Recall the ULM Altitude Memory Segment

5.12 Altimeter Mode

- Recall the ULM Altitude Memory Record

Select the User Log Memory Segment

B e f o r e v i e w i n g t h e d e t a i l o f t h e m e m o r y , c h e c k t h e
following procedure to select the desire memory segment.

Press the [adjust] and [start/stop] button together in the
Altitude Graph Display, the

'ALTIMETER LOG BOOK'

will

slide out and display for 3 seconds, the

K2-100

will

switch to the Free Records Display automatically.

During the Free Records Display, the total number of free
records segments

will

show on the display, as well as

the

'RECALL'

indicator.

P r e s s   t h e   [ a d j u s t ]   b u t t o n  o n c e   a g a i n   t o   s e l e c t   t h e
Segment  Display. During the Segment Display, the related
information of this altitude  memory segment

will

show on

the

display.

- P r e s s t h e [ s t a r t / s t o p ] b u t t o n t o s e l e c t a m o n g t h e

segments through forward scrolling; press the [lap/reset]
button to select among the segments through backward
scrolling.

- W h e n t h e d e s i r e

s e g m e n t i s d i s p l a y i n g , p r e s s t h e

[adjust] button once to review the altitude memory record
of this segment.

NOTE:

- The maximum number of record

in one segment is 1999,

while the total number of record is 2250.

When the memory is full, a '

MEM FULL'

will flashing on

the display.

Check

'To Delete the User Log Memory Segment'

section

for how to delete the User Log Memory Segment.

ULM Altitude Memory Record Display

When you are reviewing the ULM Altitude Memory Record,
the 1st row of the display shows the Altitude History
Graph.

The 2nd row of the display shows the altitude memory
and the memory number.

The 3rd row of the display shows the time which the
memory was recorded.

Press the [start/stop] button to review the next Altitude
Memory Record of this segment through forward scrolling;
press the [lap/reset] button to review the next Altitude
M e m o r y R e c o r d o f t h i s s e g m e n t t h r o u g h b a c k w a r d
scrolling.

During the ULM Altitude Memory Record reviewing, press
the [adjust] button to check the additional information of
that memory record:

- press [adjust] button once to check the detail of the

history graph (the resolution of X and Y axis, the
X axis' maximum and minimum value)

- press the [adjust] button twice to check the ascending

/ descending rate of the record,

press the [adjust] button three times to check t he
accumulative ascend of the record,

p r e s s t h e [ a d j u s t ] b u t t o n f o u r t i m e s t o c h e c k t h e
accumulative descend of the record,

Press the [mode] button once to exit the reviewing display;
press the [mode] button twice to return to Altitude Graph
Display.

NOTE:

During the ULM Altitude Memory Record reviewing, the
current record will be flash

ing

on the history graph.

5.10 Altimeter Mode

- Start the Recording of the ULM

Start/stop the User Log Memory

Press the [start/stop] button once to start the recording of
the User Log Memory, in the Altitude Graph Display.

The '

MEM

' indicator starts flashing which indicates that

the User Log Memory recording in progress.

P r e s s t h e [ s t a r t / s t o p ] b u t t o n o n c e a g a i n t o s t o p t h e
recording of the User Log Memory.

Free Record Display

While

the User Log Memory is recording (User Log

M e m o r y R e c o r d i n g D i s p l a y ) , p r e s s t h e [ a d j u s t ] a n d
[start/stop] buttons together to change the display to
Free Record Display.

The segment number and the number of free record
space is being updated on the Free Record Display.

Press [lap/reset] button to select between the Altitude
History Graph and the Segment Member.

P r e s s t h e [ m o d e ] b u t t o n t o r e t u r n t o t h e U s e r L o g
Memory Recording Display.

To Delete the User Log Memory Segment

Press and hold the [lap/reset] button for 5 seconds in the
Free Record Display to delete all ULM Altitude Memory

Segments.

To delete an individual ULM Altitude Memory Segment,
press and hold the [adjust] button for 5 seconds in that
ULM Altitude Memory Segment Display.

adjust
button

start/stop

button

start/stop

button

lap/reset

button

lap/reset

button

select the next memory
segment through
forward scrolling

select the next
memory through
forward scrolling

select the next memory
segment through
backward scrolling

select the next
memory through
backward scrolling

check the detail of
the history graph
of the record

check the ascending/
descending rate of
the record

check the
accumulative ascend
of the record

check the
accumulative descend
of the record

Memory segments

selection sequence

Memory segments

selection sequence

Memory records

selection sequence

the Altitude
History Graph

the no. of
free record
space remain

the segment
in recording

the no. of
free record
space remain

Select the ULM Altitude Memory Segment

5.9 Altimeter Mode

- Set the Sampling Rate of ULM

hold

adjust

adjust
button

min.

sec.

hour

Altitude Graph Display

Altitude Sampling Rate

The sampling rate is used for the User Log Memory
recording. This setting controls the sampling interval of each
log memory.

- There are 4 quick-set-rate (1,10 sec 1 min. and 10 min).

and 1 User Preset Rate (UPR) in the

K2-100

To set the rate other than the 4 quick-set-rate and the
existing UPR, check the "To Set the User Preset Rate'
section for more detail.

IMPORTANT:

To get an accurate result on the

altitude ascending

and descending rate, please

DO NOT

alter the sampling rate

during the

time the

User Log Memory is recording.

To Select among the Quick-Set-Rates

Press and hold the [adjust] button for 2 seconds to enter
Altitude Setting Display. Press the [adjust] button three times
to select the Sampling Rate Display.

Press the [lap/reset] button to select among the 4 quick-set-
rates and the existing UPR. When the desire

rate is shown,

press

the

[mode] button to exit the setting.

To Set the User Preset Rate

Press and hold the [adjust] button to enter the setting display
of the UPR in the Sampling Rate Display. Press the [adjust]
button to change the selection as in the User Preset Rate
Setting Sequence.

While digits are selected (flashing), press the [start/stop]
button to increase the number; press the [lap/reset] to
decrease the number. Hold

ing

down the button changes

the

number at a higher speed.

After you set the rate, press the [mode] button to exit the
setting sequence. Press the [mode] button once again to
return to the Altitude Graph Display.

Altitude Sampling Rate Setting Sequence

adjust

mode

adjust

mode

button

1 sec.

1 min.

10 sec.

10 min.

UPR

Quick-set