57
1.
Press and hold the MODE/MIN key for about 3 seconds. The current time zone
value at the bottom of the LCD display starts flashing.
2.
Press and release MODE/MIN key to adjust the time zone. The range runs from
0h to
12h
, then –
12h
to 0h, in consecutive 1-hour intervals.
3.
Confirm with the SNOOZE key and enter the
Manual time setting
.
MANUAL TIME SETTING
In case the Projection clock cannot detect the DCF-signal (for example due to
disturbances, transmitting distance, etc.), the time can be manually set. The clock will
then work as a normal Quartz clock.
1.
The hour and the minute digits will start flashing.
Hour flashing
Minutes flashing
