CHANGE BATTERIES
SEARCH FOR SENSOR
If you are seeing dashes in place of outdoor temperature, first check your sensor
batteries.
1. Hold the
+ (PLUS)
button to search for your outdoor sensor. The Reception
Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to
the display and remove power from both the sensor and station.
3. Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4. Install a new set of alkaline batteries into the sensor, then into your station.
5. If your outdoor data is still not appearing after these steps, please contact our
support staff. For additional help visit:
bit.ly/basic_restart
We designed this station for convenience, so that a simple change of batteries does
not lose your data or require you to power down the station.
Sensor:
1. When the Battery Indicator shows next to the Outdoor Humidity, replace
batteries in your Outdoor Sensor.
2. Then hold the
+ (PLUS)
button to search for the sensor.
Station:
1. When the Battery Indicator shows next to the Indoor Humidity, change batteries
in the station.
2. When changing the batteries in the station, continue using the power cord. After
replacing the batteries, no other action is needed. The batteries in the station only
maintain time/date in the event of a power outage.
6
