Search for Outdoor Sensor
•
Hold the
HEAT/DEW button
for 3 seconds to search for sensors.
•
The strength signal icon will animate until the sensor signal is received or for 3
minutes if no signal available.
Change Channels (when using multiple sensors)
From normal time display, press the button to change channels.
Channel 1, 2, or 3 will show.
Remote Sensor Channels — Auto Scroll:
•Press the button to toggle between remote
sensor channels when multiple sensors are used.
•The station will automatically rotate through the
channels for all connected sensors.
•Press and release the button to lock the station
into one channel. Then view channels individually
with a press of the button.
Low Battery Icon
The Low Battery Icon
indicates when batteries are in the station or sensor.
•
If the icon is displayed in the outdoor section, replace the batteries in the
outdoor sensor.
•
If the icon is displayed in the indoor section, replace the batteries in the
forecast station.
Model: C87030/C87214
www.lacrossetechnology.com/support
Page | 12
Heat Index Dew Point:
Outdoor Sensor Positioning
•
Mount the outdoor sensor on a north-facing wall or in any well-shaded area.
Under an eave or deck rail is preferred
.
•
The maximum wireless transmission range to the forecast station is over 300
feet (91 meters) in open air; this does not include barriers such as walls or floors.
•
Be sure the outdoor sensor is mounted vertically.
• Press the
HEAT/DEW
button once to view heat index.
• Press again to view dew point.
• Press the button to change channels.
