background image

 

 

  P a g e

| 31  

FCC STATEMENT 

 
Statement according to FCC part 15.19: 

This device complies with part 15 of the FCC rules.  Operation is subject to the following two 
conditions: 
(1) 

This device may not cause harmful interference. 

(2) 

This device must accept any interference received, including interference that may 

cause undesired operation. 

Statement according to FCC part 15.21: 

Modifications not expressly approved by this company could void the user's authority to operate 
the equipment. 

Statement according to FCC part 15.105: 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

  Connect the equipment into an outlet on a circuit different from that to which the receiver 

is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 

WARRANTY INFORMATION 

 
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this product.  To 
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem 
determination and service procedures.  Warranty service can only be performed by a La Crosse 
Technology, Ltd authorized service center.  The original dated bill of sale must be presented 
upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, 
Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as 
stipulated herein, with new or reconditioned parts or products if found to be defective during the 
limited warranty period specified above.  All replaced parts and products become the property of 
La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.  Replacement 
parts and products assume the remaining original warranty, or ninety (90) days, whichever is 
longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs 
covered by this warranty.  If necessary repairs are not covered by this warranty, or if a product 
is examined which is not in need or repair, you will be charged for the repairs or examination.  
The owner must pay any shipping charges incurred in getting the La Crosse Technology, Ltd 
product to a La Crosse Technology, Ltd authorized service center.  La Crosse Technology, Ltd 
will pay ground return shipping charges to the owner of the product to a USA address only. 
 

Summary of Contents for C86234

































Reviews: