background image

Battery replacement instruction:

When batteries of different brand or type are used 
together, or new and old batteries are used together, 
some batteries may be over-discharged due to a differ-
ence of voltage or capacity. This can result in venting, 
leakage, and rupture and may cause personal injury.

• Always purchase the correct size and grade of battery 
  most suitable for the intended use.
• Always replace the whole set of batteries at one time,  
  taking care not to mix old and new ones, or batteries of 
  different types.
• Clean the battery contacts and those of the device 
  prior to battery installation.
• Ensure the batteries are installed correctly with regard 
  to polarity (+ and -).
• Remove batteries from product during periods of non-
  use. Battery leakage can cause corrosion and damage 
  to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect 
  the environment please check the internet or your local 
  phone directory for local recycling centers and/ or 
  follow local government regulations.

Replace the Coin Cell Battery

 1.  Use a coin to turn the battery cover to the left to 
     remove it.
2.  Pull back the metal pin and gently remove thebattery.
3.  Insert a fresh CR2032 battery with the + side up and 
     snap into place.
4.  Replace the battery cover and use the coin to turn it 
     to the right to lock.

 

Swallowing may lead to serious injury in as little 
as 2 hours or death, due to chemical burns and 
potential perforationof the esophagus.

If you suspect your child has swallowed or 
inserted a button battery, immediately seek urgent 
medical assistance.

Examine devices and make sure the battery 
compartment is correctly secured, e.g. that the 
screw or other mechanical fastener is tightened. 

Do not use if compartment is not secure.

Dispose of used button batteries immediately and 
safely.

Flat batteries can still be dangerous.
Tell others about the risk associated with button 
batteries and how to keep their children safe. 

1. 

2.

3.

4.

5.

6.

WARNING:  

KEEP BATTERIES OUT OF REACH OF CHILDREN

This product contains a button battery.
If swallowed, it could cause severe injury or death 
in just 2 hours.
Seek medical attention immediately. 

1.
2.

3.

WARNING

 

Care & Maintenance 

Warnings 

10

Summary of Contents for 817-2410B













Reviews: