Page | 9
www.lacrossetechnology.com/support/
724-1409
1. Mount in an open area for a more accurate rain count.
2. Install the Rain sensor on a level platform that is stationary.
3. Insert one, two, or three mounting screws (not included) through the holes in the
base of the rain sensor.
4. Ideally, your rain sensor should be mounted at least 6 ft in the air and have a
direct line of sight to the display.
5. The rain sensor should be accessible to allow for periodic cleaning of debris or
insects.
6. The maximum wireless transmission range to the rain station is over 300 feet
(91 meters) in open air, not including walls or floors.
Search for Rain Sensor
Position Rain Sensor
• Hold the SENSOR button to search for the rain sensor.
• The sensor reception icon will flash until the sensor signal is received or for 3
minutes if no signal available.
• After showing dashes for 30 minutes, the station will automatically look for the
sensor signal.
1. Remove batteries from your sensor and batteries from your station.
2. Press any button 20 times.
3. After 15 minutes insert batteries into your sensor, and into your rain station.
4. Wait 15 minutes to establish a strong connection.
5. Place sensor outside.
Restart
Holes for mounting
Rocker
Self-emptying
drain holes
Position Rain Station
• Use the triangle hole on back to hang on the wall.
• Use the pull out stand on the battery cover to place on your
desk or table.
