background image

617-1485Bv2          www.lacrossetechnology.com/support           

Page | 8

  

FCC STATEMENT 

 

This equipment has been tested and found to comply with the limits for a  

Class B digital device, pursuant to part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy, and if not installed and used in accordance 

with the instructions, may cause harmful interference to radio 

communications.  

However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:  

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and receiver.  

• Connect the equipment into an outlet on a circuit different from that to  

   which the receiver is connected.  

• Consult the dealer or an experienced radio/TV technician for help.  

 

This device must not be co-located or operating in conjunction with any 

other antenna or transmitter.  

Operation is subject to the following two conditions: 

 

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including  

      interference that may cause undesired operation. 

 

Caution! 

 

The manufacturer is not responsible for any radio or TV interference 

caused by unauthorized changes or modifications to this equipment. Such 

changes or modifications could void the user authority to operate the 

equipment. 

 

All rights reserved. This manual may not be reproduced in any form, even 

in part, or duplicated or processed using electronic, mechanical or chemical  

process without the written permission of the publisher. 

This booklet may contain errors or misprints. The information it contains is  

regularly checked and corrections are included in subsequent editions. We  

disclaim any responsibility for any technical error or printing error, or their 

consequences. All trademarks and patents are recognized. 

 

Canada Statement 

 

 

This device complies with CNR Industry Canada license -exempt devices.  

Operation is subject to the following two conditions:  

(1) This device may not cause interference; and  

(2) This device must accept any interference, including interference that  

      may cause undesired operation of the device. 

 

 

 

Summary of Contents for 617-1485v2









Reviews: