7
Fahrenheit/Celsius:
1. Press and release the
SET/°C/°F
button once to switch from Fahrenheit to Celsius.
Alarm Set:
Hold the ALARM button for 5 seconds to enter the alarm time set mode.
1. The alarm
hour
digit will flash.
2. Press and release the +/PROJ ON/OFF or -/TIME SEARCH buttons to
select the hour.
3. Press and release the
SET/°F/°C button
to set the minutes. The
minute
digits will flash.
4. Press and release the +/PROJ ON/OFF or -/TIME SEARCH buttons
to
select the minutes.
5. Confirm with the
SET/°F/°C button
and exit.
6. The alarm icon
will show after the minutes indicating the alarm is
active
.
7. The alarm icon will flash when the alarm is sounding.
Deactivate Alarm:
1. Press and release the ALARM button once to show Alarm Time.
2. Press and release the ALARM button to
deactivate
the Alarm. The
alarm icon will disappear
indicating the alarm is no longer active.
Snooze
1.
When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 10 minutes.
The snooze icon
Zz
will flash when the snooze feature is active.
2. To stop alarm for one day, press ALARM button, while in snooze mode. The alarm icon will remain
solid.
Note:
When the alarm sounds, it continues for 2 minutes and then shuts off completely.
Temperature Trend Arrows:
The indoor temperature trend indicators are updated every 30 minutes. These trends represent
temperature changes over the past three hours.
Temperature rising more than 2°F /1°C in the past three hours
Temperature has
not changed
more than 2°F /1°C in the past three hours
Temperature falling more than 2°F /1°C in the past three hours
The temperature trend indicators are shown next to the indoor temperature readings.
Projection
Battery Power:
Press and release the SNOOZE/LIGHT button to show the projection for 10 seconds.
Note:
Projection will not display constantly when operating on battery power.
A/C Power:
Projection is displayed constantly unless turned off.
OFF
: Hold the +/PROJ ON/OFF button to turn the projection OFF while operating on a/c power.
ON:
Hold the +/PROJ ON/OFF button to turn the projection ON while operating on a/c power.
Rotate Projection
: Press and release the PROJECTION button to rotate projection image 90
degrees. Press and release the PROJECTION button again to rotate another 90 degrees.
Change Projection Mode
: Hold, then release the PROJECTION button to switch projection modes.
Watch the projection image to view the changes.
