5
Activate/Deactivate Alarm:
The alarm is active when set.
Press and release the
ALARM
button to deactivate or activate the alarm.
The Alarm Time will show briefly.
The Alarm Icon will show only when alarm is active.
Silence a sounding alarm:
Press any button except
SNOOZE
to silence alarm for 24 hours.
Snooze:
When the alarm sounds, press the
SNOOZE
button to silence the alarm
for 10 minutes. The Alarm Icon will flash.
Note:
The alarm will sound with increasing frequency for two minutes,
then shut off completely if not deactivated.
Search for Sensors
If you are seeing “NO” or dashes for any sensor readings, please try the
following steps:
1.
Hold the
PLUS (+)
button to search for all sensors.
The Reception Indicator will begin to animate.
2.
If after 3 minutes the sensor still isn’t connected, bring the sensor inside next
to the display and remove power from the sensor and station.
3.
Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4.
Install a new set of alkaline batteries into the sensor, then power up your
station again.
5.
If your sensor data is still not appearing after these steps, please contact our
support staff. For additional help visit:
