ATOMIC DIGITAL CLOCK
6 | PAGE
When the outdoor readings show dashes and searching for the sensor has not helped, complete a full
restart:
1. Bring the sensor in the house about five feet from the clock.
2. Remove batteries from the sensor, and from the clock
3. Press any button 20 times.
4. After 15 minutes, insert batteries into the sensor, and into the clock.
5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.
FACTORY RESTART
SENSOR WEATHER SHIELD
• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor
from rain and snow.
• This shield will offer limited protection from the sun’s heat.
• Optional purchase at:
LOW BATTERY INDICATORS
• When the Battery Indicator shows next to the Outdoor Temperature, replace batteries in the Outdoor
Sensor.
• When the Battery Indicator shows next to the Indoor Temperature, replace batteries in your Clock.
OUTDOOR SENSOR RECEPTION
• Hold the - button 3 seconds to search for the sensor.
• The strength signal icon will flash until the sensor signal is received or for 3 minutes if no signal is
available.
• The signal will show solid when connected to the sensor.
If you require additional support, get in touch with our friendly customer support team based out of La
Crosse, WI.
Phone:
1-608-782-1610
Online:
Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.
WE’RE HERE TO HELP!
