background image

Sensor Reception

• 

Hold the - button 3 seconds to search for the sensor. 

• 

The strength signal icon will flash until the sensor signal is received 

   or for 3 minutes if no signal available.

• 

The signal will show solid when connected to the sensor.

Low Battery Icon

Mount Temperature Sensor

• 

Battery icon by time-Change batteries in the clock.

• 

Battery icon by outdoor temperature-Change batteries in the sensor.

 

• Mount the outdoor sensor on a north-facing wall or in any 
   well-shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast station is over 300  feet 
   (91 meters) in open air; this does not include barriers such as walls or floors.
• Be sure the outdoor sensor is mounted vertically.

Position Clock

The clock has a pullout stand to sit on a desk or table, or openings on the back to 
mount on a wall.

• 

For best Atomic time reception orientate the clock with the front or the back 

   facing Ft. Collins, Colorado.

• 

Choose a location 6 feet or more from electronics such as cordless phones, 

   gaming systems, televisions, microwaves, routers etc.

• 

Place within range of the outdoor sensor (330 feet open air).

Restart

When the outdoor readings show dashes: 

• Bring the sensor in the house five feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection. 
• Place sensor outside in shaded location.

Specifications

513-1417CH             

www.lacrossetechnology.com/support  

              Page | 6

Page | 5             

www.lacrossetechnology.com/support  

               513-1417CH

Follow us on our social media outlets for the latest promotions, 
product support, and awesome giveaways.

Let’s Be Social!

If you have ideas for features or support solutions you’d like to see us 
make, please let us know! We truly want to make owning a La Crosse 
Technology product not only a practical experience, but also a fun 
one.  So email us at: 

[email protected]

Help Us, Help You!

Indoor Temperature Range: 

32°F to 122°F (0°C to 50°C)

Outdoor Temperature Range: 

-40°F to 140°F (-40°C to 60°C)

Transmission Range:

 

Over 300 ft. (91 meters) RF 433MHz (open air)

Power Requirements:

 

513-1417CH - 2 AA batteries (not included)
TX141-Bv3 - 2 AA batteries (not included)
 

Battery Life:

 

513-1417CH-over 12 months
TX141-Bv3-over 12 months

Dimensions:

513-1417CH- 11.10” W x 1.14” D x 6.75” H
                       (28.19 W x 2.89 D x 17.15 H cm)

TX141-Bv3- 1.57” L x 0.79” W x 5.12” H 
                    (3.98 L x 2.0 W x 13.0 H cm)

        WARNING: 

This product can expose you to chemicals including styrene, which

        is known to the State of California to cause cancer. For more information go to: 
        

www.P65Warnings.ca.gov

Summary of Contents for 513-1417CH






Reviews: