SET ALARM:
ALARM HOUR
: Press and hold AL button to enter alarm time setting
mode. The Alarm Hour will be flashing. Use the PLUS or MINUS
button to set the Hour. Please note AM or PM. Press and release the
AL button.
ALARM MINUTE
: The Alarm Minutes will be flashing. Use the PLUS
or MINUS button to set the Minutes. Press and release the AL button.
ALARM ACTIVATION:
Press and release the AL button to show Alarm Time. Press and release the
PLUS button to activate or deactivate the Alarm. The Bell icon appears
when the alarm is activated.
SNOOZE:
When the alarm sounds, press the SNOOZE button to trigger snooze alarm
for 9 minutes. The snooze icon
Zz
will flash.
To stop alarm for one day, press AL button, while in snooze mode. The
alarm icon will show and the snooze icon
Zz
will disappear.
SET BAROMETER
: The barometric pressure is set based on the local
elevation you program into the weather station.
UNIT OF MEASURE
: Press and release the BARO button then the
UP ARROW button to select unit of measure in
hPa/mb
(Hecto
Pascal/Milibars) or
inHg
(Inches of Mercury). Press and release the
BARO button to confirm.
BAROMETRIC PRESSURE:
Press and hold BARO button and the
Elevation (in feet or meters) will flash. Use the UP or the DOWN
ARROW button to enter the current elevation in meters or feet. Press
BARO to confirm and exit the setting.
NOTE
: Elevation will automatically show in Feet if when in
inHg
and
show in Meters when in
hPa
or
mb
.
When in feet the numbers will change by 30 each time one of the
ARROW buttons is pressed. When in meters the numbers will
change by 10.
WEATHER FORECAST ICONS:
The unit predicts weather condition of the next 12
– 24 hours based on the
change of atmospheric pressure. The weather forecast is about 70-75%
correct. As weather conditions cannot be 100% correctly forecasted, we
cannot be responsible for any loss caused by an incorrect forecast.
SUNNY PARTLY CLOUDY RAINY STORMY
CLOUDY
NOTE:
The difference in the Rainy icon and Stormy icon is that the stormy
icon will blink every second indicating more severe weather.
MIN/MAX TEMPERATURE RECORD:
VIEW MIN/MAX
: Press the MEM button view indoor and outdoor MAX, MIN
and Current temperature.
AUTO RESET
: The minimum and maximum records will automatically reset
at midnight.
TEMPERATURE TRENDS:
The temperature trend icon after the outdoor and indoor temperature will
indicate
rising
,
steady
, or
falling
temperatures.
POSITIONING THE WEATHER STATION:
There are two possible ways to mount the atomic weather station:
Foldout leg stands or wall mount.
FOLDOUT LEG STANDS
The two foldout leg stands are located on the back of the
weather station. Pull the leg stands out from the back of the
weather station to place the weather station on a desk or
table.
WALL MOUNT
Install one screw (not included) into a wall, leaving
approximately 3/16 of an inch (5mm) extended from the wall.
Place the atomic weather station onto the screw, using the
hanging hole on the backside.
Gently pull the weather station down to lock the screw into
place.
POSITIONING THE OUTDOOR TEMPERATURE SENSOR
The remote temperature sensor should be mounted vertically.
WALL MOUNT
Install one screw (not included) into a wall within leaving
approximately 3/16 of an inch (5mm) extended from the wall.
Place the transmitter onto the screw, using the hanging hole
on the backside.
Gently pull the transmitter down to lock the screw into place.
Mount where direct sunlight cannot reach the outdoor temperature sensor.
Mount the outdoor temperature sensor on a North-facing wall or in any well-
shaded area. The maximum transmitting range in open air is 100-feet (30
meters). Obstacles such as walls, concrete, and large metal objects can
reduce the range.
SPECIFICATIONS:
Indoor Temperature
:
Range:
32° F to 122° F (0° C to + 50° C)
Resolution:
1° F/C
Outdoor Temperature
:
Range:
-4° F to 140° F (-20° C to + 60° C)
Resolution:
1° F/C
Distance:
100 ft (30 meters) RF 434MHz (open air)
Interval:
Above 0.3 degrees =every 31 seconds
Below 0.3 degrees = every 2.5 minutes
Power:
Receiver:
2-AA, IEC, LR6 alkaline batteries (not included).
Transmitter:
2-AAA, IEC, LR3 alkaline batteries (not included).
Dimensions:
Receiver:
9.44 ” W x 1.49” D x 7.08 ” H
Transmitter: 4.49” W x .86” D x 3.54” H
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product.
To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for
problem determination and service procedures. Warranty service can only be performed
by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale
must be presented upon request as proof of purchase to La Crosse Technology, Ltd or
La
Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no
charge as stipulated herein, with new or reconditioned parts or products if found to be
defective during the limited warranty period specified above. All replaced parts and
products become the property of La Crosse Technology, Ltd and must be returned to La
Crosse Technology, Ltd. Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd
will pay all expenses for labor and materials for all repairs covered by this warranty. If
necessary repairs are not covered by this warranty, or if a product is examined which is
not in need or repair, you will be charged for the repairs or examination. The owner must
pay any shipping charges incurred in getting the La Crosse Technology, Ltd product to a
La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will
pay ground return shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and workmanship
with the following specified exceptions: (1) damage caused by accident, unreasonable
use or neglect (including the lack of reasonable and necessary maintenance); (2)
damage occurring during shipment (claims must be presented to the carrier); (3) damage
to, or deterioration of, any accessory or decorative surface; (4) damage resulting from
failure to fo
llow instructions contained in the owner’s manual; (5) damage resulting from
the performance of repairs or alterations by someone other than an authorized La
Crosse Technology, Ltd authorized service center; (6) units used for other than home
use (7) applications and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference.. This warranty covers only
actual defects within the product itself, and does not cover the cost of installation or
removal from a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-
related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH
THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT
TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to
the State. Some States do not allow the exclusion of consequential or incidental
damages therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is available at:
www.lacrossetechnology.com/512-807
Le manuel d'instruction complet est disponible sur:
www.lacrossetechnology.com/512-807
El manual de instrucciones completo está disponible en:
www.lacrossetechnology.com/512-807
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this
handbook is regularly checked and corrections made in the next issue. We accept no
liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
EJMA8418L210
