Hand Screw
15
Glide Sensor Mounting
Fence posts, poles, decks, and mailboxes are common mounting options due to their
convenience. Many users prefer these types of locations as the data they provide is accurate
from their ground level. However, because the wind in these spots is often affected by
obstructions, the readings may differ when compared to local reporting stations.
Basic Installation
Mount the Mast to a flat surface
with the four provided screws.
Place the Sensor on top of the
Mast. Ensure the Solar Panel is
facing the sun.
Secure the Sensor to the Mast by
tightening the screws on the side.
1.
2.
3.
Flexible Installation
Remove the Small Insert from the bracket and
install the Short Arm with the Hand Screw in its
place. Then secure the sensor to the Mast by
tightening the screws on the side (step 3 above).
Be sure no to lose the washer on the Hand Screw.
This configuration allows you to attach the sensor
to angled locations and easily make adjustments to
ensure the Mast and Sensor are level.
Remove
