View Add-on Temperature/Humidity Sensors
•
Press the
-/CH
button to toggle between
remote sensor channels when multiple
sensors are used.
•
Channels are indicated with CH 1, CH 2, or
CH 3, in the outdoor temperature area.
•
CH 1 is reserved for the Temperature/Humidity
from your Wind Speed Sensor.
CH 2
If you are seeing dashes for any sensor readings, please try the following steps:
1.
Hold the
WIND
button to search for your Wind Sensor. Hold the
TEMP
button
to search for all Temperature/Humidity Sensors. The Reception Indicator will
begin to animate.
2.
If after 3 minutes the sensor still isn’t connected, hold the
WARNING
and
ALERTS
buttons together to factory reset the station.
3.
If your sensor data is still not appearing after these steps, please contact our
support staff. For additional help visit:
Search for Sensors
Low Battery Icons
Low Battery Icon by Time, replace batteries in the Station.
Low Battery Icon by the Wind replace batteries in the Wind Sensor.
Low Battery Icon by Outdoor Humidity, replace batteries in the add-on
Temperature/Humidity Sensor.
12