La Crosse Technology, Ltd
Page 5
2. With alarm time showing, hold the ALARM button for 3 seconds to enter alarm time set
mode.
3. Press the +/- buttons to adjust the alarm hour.
4. Press the ALARM button to confirm and move to the minutes.
5. Press the +/- buttons to adjust the alarm minutes.
6. Press the ALARM button to confirm and move to alarm type.
7. Use the +/– to select SINGLE, MON-FRI or WEEKEND alarm.
8. Press the ALARM button to confirm and exit.
Note: This is a crescendo alarm. It will sound for two minutes then shut off completely if no
buttons are pressed.
Activate/Deactivate Time Alarm
When you finish settings, the alarm is active.
From the normal time display, press and release the ALARM button to view alarm.
Press and release the SET button to deactivate or to activate the alarm.
When active the alarm clock icon will show.
The clock icon will not show if the alarm is not active.
Snooze Alarm
When the alarm sounds, if SNOOZE is pressed, SNOOZE - duration will show in date
area.
During snooze count down, press any button except for SNOOZE/LIGHT to exit snooze
count down
During snooze count down, press SNOOZE/LIGHT only to change backlight.
When snooze alarm sounds, SNOOZE – duration “00m 00” will flash, press any button
except for SNOOZE/LIGHT to stop ringing and exit snooze function.
Repeat snooze: When snooze alarm sounds, SNOOZE – duration “00m 00”” will flash.
Press SNOOZE/LIGHT button to stop ringing and activate the snooze function again.
USB Charge Port
Explanation: The alarm clock has two integrated USB charging ports that will charge a
device when operating on Power cord.
USB Output: Up to 3 Amps total if both ports are used
• Charge devices that self-regulate.
• Do not charge multiple devices from the same USB port.
• Must operate clock with power cable to charge other devices.
• Plug your device into one of the USB ports on the front of the clock.
• The clock will show HELLO for 3 seconds.
• The lightning bolt will flash while charging.
• When battery is full and minimal power is drawn, a solid battery icon is displayed.
• When no device is connected, no battery will show.
