La Crosse Technology, Ltd
Page 3
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
Power cord:
The backlight can show continuously when operating the alarm clock with the 5-volt
Power cord.
HIGH: The backlight is defaulted to HI (brightness) when the Power cord is in use.
LOW: Press and release the SNOOZE/LIGHT button to dim the intensity of the
backlight.
OFF: Press and release the SNOOZE/LIGHT button to turn the backlight off to sleep.
Note: When the Power cord is NOT in use, the HIGH-LOW-OFF backlight feature is not
available.
Note: When the backlight is off, press any button to activate the backlight for 10 seconds,
and then it will turn off again.
Battery power:
Press and release the SNOOZE/LIGHT button and the backlight will show for 10 seconds,
when operating on batteries only.
Try this exercise in a dim room. The weather station has a bright, dim and OFF setting for
the backlight. Wait 15 seconds after pressing the SNOOZE/LIGHT button to see if backlight
stays on. This will assure it is not in OFF mode.
1.
Check that the Power cord is inserted correctly to the weather station and the outlet.
2.
Remove the batteries.
3.
Press the SNOOZE/LIGHT button. If the backlight comes on and the display is active
your Power cord works.
4.
Wait 15 seconds to see if the back light stays on.
5.
If the backlight goes out after 15 seconds, repeat #3.
Time is inaccurate
This clock has manual set time. Use the
Daylight Saving Time
This clock has manual set time. Use the
spring to enter daylight saving time, and in the fall to return to Standard Time.
Program Menu
• Hold the SET button to enter time set mode.
• Press the +/- buttons to adjust the values.
• Press the SET button to confirm adjustments and move to the next item.
• Press the SNOOZE/LIGHT button at any time to exit.
Time set order:
