La Crosse Technology 308-179ORV2, Faqs

Page: 4 / 12

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 4
Power Requirements
•
2-AA batteries power the outdoor sensor.
•
We recommend Alkaline batteries for the outdoor sensor.
•
You may choose to use Lithium batteries for temperatures below -20°F/-28.8°C.
Inaccurate Outdoor Temperature Reading
Explanation: High outdoor temperature readings are generally a location issue. Low
outdoor temperature readings are power related or a sensors going bad.
•
The outdoor sensor reads the environment where it is mounted. When mounted
inside the home, it will read inside temperature.
•
When the outdoor sensor reads high during the day, but not at night, it is a
positioning problem.
•
Look for heat sources such as sunlight, door or window frames or reflected heat.
Side-by-side test: Bring the outdoor sensor in the house and place it next to the
temperature station for 2 hours.
•
Compare indoor and outdoor temperature. The temperatures should be within 4
degrees to be within tolerance.
•
If the outdoor sensor reads correctly when next to the temperature station, try a
different location outside.
Intermittent Outdoor Temperature
Explanation: Intermittent problems are the hardest to resolve. RF (radio frequency)
communication may come and go occasionally. This can be normal in some environments
(e.g. moister climates). If outdoor sensor signal is lost, please wait 2-4 hours for the signal
to reconnect on its own.
•
Move the outdoor sensor to a closer location.
•
Distance/Resistance can cause loss of outdoor sensor signal.
•
Check Batteries.
Freezer test: Confirm the temperature station is reading the correct outdoor sensor. Place
the outdoor sensor in the freezer for an hour and watch the temperature drop on the
temperature station.
Indoor distance test: Please complete the Restart with outdoor sensor and temperature
station 5-10 feet apart and inside to establish a strong connection.
•
After 15 minutes, if there is a reading in the outdoor temperature area, move the
outdoor sensor to another room with one wall between the outdoor sensor and the
temperature station.
•
Observe to see if the temperature remains on consistently for 1 hour.
•
If the temperature remains on while in the house, then it is likely a
distance/resistance issue.